AQUA LUBE 300^TM  Turbine Pump Drip Oil

(FDA ,OSHA, NSF approved)

BACK TECHNICAL DATA MSDS

Description:

Developed by Big State Pump Company and produced by the worlds largest mineral oil manufacturer to exacting standards, to the premier Turbine Pump Drip Oil F.D.A. and OSHA approved, this oil is non-toxic food grade. Aqua Lube 300^TM is classified as a drug therefore is subject to F.D.A. inspection. All of these features are important to you not only as a user of this oil but also as a consumer. Totally safe for water well pumps.

The leading question however is: What kind of job does it do as far as lubrication? This is where we at Big State Pump Company stressed perfection, we feel that it is vitally important to have a product that is safe and yet do an excellent lubrication job on your Turbine pump.

AQUA LUBE 300 ^TM  does this and more

1.  Will not coagulate in water.

2. Minimal viscosity change over a broad range of temperature*.
3. Tested for lubricity on all brands of Turbine pumps with excellent results.
4. Years of research & development to produce the perfect oil for your pump.
5. Contains only food grade mineral oil. Totally non-nutritive & will not promote bacterial growth.
6. Colorless, odorless and tasteless makes AQUA LUBE 300 ^TM  your best product for oil turbine pumps.
7. Exceeds Class H-1 Specifications.

Directions for use:  PUMP  SHAFT (Oil Lubricated)

The oil is supplied to the pump shaft by drip-feed, either electrically or manually operated. Oil Lubrication is essential for prevention of needless wear and damage to shafting and bearings.

The drip-cup or automatic lubricator should be adjusted to about 30 drops per minute and operated at this flow rate for the first 20 operating hours. Unless an automatic solenoid controlled oiler is furnished, shut off the manual lubricator during the idle periods. After running the 20 (twenty) hours, a minimal recommended oil flow rate is between 5 and 6 drops per minute for each hundred feet of pump depth.

Example: 500 ft. Pump Setting.

_____________ X 6 drops/min.= 30 drops/min. /min

 

Physical Properties:

SSU @ 100 deg. F……………..350                    Fire Point F………………....490

SSU @ 150 deg. F……………..108                    Color………………………..+30 Water White

SSU @ 210 deg. F……………..52                      Dielectric Strength………….Above 25 KV

SSU @ 300 deg. F……………..37                      USO Acid Test………………Passes

SSU @ 350 deg. F……………..34                      Distillation ASTM D 1160…..2½ % @

Specific Gravity @ 60 deg. F…..0.885                 UV Absorbance 121.1146……Passes

Viscosity Index…………………70                     Typical Distillation Values @ 760mm

Pour Point F……………….…-10                                       IBP………….660F

Flash Point F…………………..430                                      10%………….780

                                                                                                50%………….837

Chemical Solutions Int'l Corp. is the exclusive distributor of Aqua Lube 300 of Big State Pump Co.