Crude X (Catalog # RP-106) General Information - Application Information - MSDS

1. CRUDE X is designed to clean heavy hydrocarbon, tar, asphalt, creosote and certain polymer buildup on all metal and concrete surfaces.
   
   
2. Application instructions are as follows:
   
   
   1. Apply solution by spraying, brushing or dipping. Solution should be used at full strength. DO NOT DILUTE WITH DIESEL.
      
      
   2. Allow solution to set for the time needed to soften or dissolve the material to be cleaned from the surface.
      
      
   3. Rinse or flush with water or steam. CRUDE X is highly effective when used with steam mixing equipment.
      
      
   4. If surface needs additional cleaning, repeat steps A through C.
      

---

Back to Main Catalog