CSI-1 (Catalog # RP-105) Technical Data - MSDS - Test Results

Description:
CSI-1 is a product designed to reduce the viability of ANTHRAX BACILLUS. Testing of CSI-1 with 10,000,000 spores indicates a reduction of viable spores to less than 500 after 30 minutes. After treatment for 2 hours, the result was a complete loss of spore viability. A copy of the test is attached.

Application:

Designed for use on most surfaces where contamination exists. The product will not damage most surfaces being cleaned.

Directions for use:

CSI-1 should be applied on all contaminated surfaces and allowed to set for at least 2 hours. Sufficient product should be applied so that it does not dry before the proper set time. The surface should then be cleaned with wet paper towels removing all of CSI-1 from the surface being cleaned. If the surface remains sticky, clean again with wet paper towels. Waste should be disposed of in accordance with local and federal governmental regulations.

Physical Properties:

Appearance	Clear liquid with medium viscosity & typical synthetic cleaner odor.
Specific Gravity	1.02
Flash Point	None
Solubility in Water	100%
pH of 5% Solution	4.4
Foaming Tendency	Medium

Precautions:
Personnel should wear rubber gloves, rubber boots and eye protection.
Harmful if swallowed.
Avoid inhalation of mist.

Standard Packaging:
5 gallon plastic pails.
55 gallon poly head-drums.
Bulk.

Note: To the best of our knowledge the information contained in this Technical Data sheet is accurate. However, neither Chemical Solutions Int'l. Corp. nor any of its affiliates makes any warranty, expressed or implied, or accepts any liability in connection with this information or its use.

FOR INDUSTRIALUSE ONLY.

---

Back to Main Catalog